2036 aluminum this is an early application of a kind of hard aluminum, commonly known as standard hard aluminum, with moderate strength, annealing, quenching and hot state plasticity is good, heat treatment can be strengthened, quenching and natural aging state in use, spot welding weldability is good.
2036 aluminum alloy features: high strength, a certain heat resistance, can be used for working parts below 150℃.
The strength of 2036 alloy is higher than that of 7075 alloy.
2036 aluminum alloy features: high strength, a certain heat resistance, can be used for working parts below 150℃.
The strength of 2036 alloy is higher than that of 7075 alloy.
1100 aluminum alloy is 99.0% ordinary industrial pure aluminum.
Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;
After anodic oxidation, the corrosion resistance can be further improved and a beautiful surface can be obtained.
Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;
After anodic oxidation, the corrosion resistance can be further improved and a beautiful surface can be obtained.
1070 aluminum has high plasticity, corrosion resistance, electrical conductivity and good thermal conductivity, but low strength, not through heat treatment to strengthen, cutting is not good, can accept contact welding, gas welding.
Make use of its advantages to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts.
Make use of its advantages to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts.
1100 aluminum alloy is 99.0% ordinary industrial pure aluminum.
Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;
After anodic oxidation, the corrosion resistance can be further improved and a beautiful surface can be obtained.
Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;
After anodic oxidation, the corrosion resistance can be further improved and a beautiful surface can be obtained.
The main alloying elements in 6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
6082 is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
7075-T6 aluminum alloy hardness is 150HB, belongs to the high hardness aluminum alloy.
7075T6 aluminum alloy is precision machined aluminum in the United States, one of the most commercially available alloys.
The main alloying element of 7075 series is zinc, which has strong strength, good mechanical properties and anode reaction.
7075T6 aluminum alloy is precision machined aluminum in the United States, one of the most commercially available alloys.
The main alloying element of 7075 series is zinc, which has strong strength, good mechanical properties and anode reaction.
6063 aluminum alloy material.
The main alloy elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy.
The main alloy elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy.
7075 aluminum alloy is a cold - treated forging alloy, high strength, far better than mild steel.
7075 is one of the strongest alloys commercially available.
Under heat treatment, can achieve very high strength characteristics.
7075 is one of the strongest alloys commercially available.
Under heat treatment, can achieve very high strength characteristics.
5083 belongs to Al-Mg-Si alloy, which is widely used, especially in the construction industry.
It is the most promising alloy.
Good corrosion resistance, good weldability, good cold processing, and has moderate strength.
The main alloy element of 5083 is magnesium, which has good forming performance, corrosion resistance, weldability and medium strength.
It is the most promising alloy.
Good corrosion resistance, good weldability, good cold processing, and has moderate strength.
The main alloy element of 5083 is magnesium, which has good forming performance, corrosion resistance, weldability and medium strength.
5754 aluminum alloy is a typical al-Mg alloy with moderate strength, good corrosion resistance, weldability and easy to be formed.
In foreign countries, 5754 aluminum alloy sheet with different heat treatment status is the main material used in automobile manufacturing industry (car doors, molds, seals) and can industry.
In foreign countries, 5754 aluminum alloy sheet with different heat treatment status is the main material used in automobile manufacturing industry (car doors, molds, seals) and can industry.
The mechanical properties of 2024-T3 aluminum alloy can be significantly improved after heat treatment.
2024 is a typical duralumin alloy in the aluminum-copper-magnesium system.
It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance.
2024 is a typical duralumin alloy in the aluminum-copper-magnesium system.
It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance.
6082-T6 aluminum, the main alloying elements in the alloy are magnesium and silicon, with excellent processing performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, coating, excellent anodic oxidation effect
is a typical extrusion alloy. Widely used in building profiles, irrigation pipes, pipes, bars and profiles for vehicles, platforms, furniture, elevators and fences.
is a typical extrusion alloy. Widely used in building profiles, irrigation pipes, pipes, bars and profiles for vehicles, platforms, furniture, elevators and fences.
Aluminum foil surface is clean, sanitary, no bacteria or micro-organisms can not grow on its surface.
aluminum foil is a non-toxic packaging material, it can directly contact with food without any harm to human health.
aluminum foil is a kind of tasteless odorless packaging material, will not make the packaging of food have any peculiar smell.
aluminum foil itself is not volatile, it itself and packaged food will never dry or shrink.
at high temperature or low temperature, aluminum foil will not have the phenomenon of oil permeability.
aluminum foil is a non-toxic packaging material, it can directly contact with food without any harm to human health.
aluminum foil is a kind of tasteless odorless packaging material, will not make the packaging of food have any peculiar smell.
aluminum foil itself is not volatile, it itself and packaged food will never dry or shrink.
at high temperature or low temperature, aluminum foil will not have the phenomenon of oil permeability.
2024 aluminum alloy, the main alloying elements are copper and magnesium.
Applications where high strength but low weight ratio is required, and good fatigue strength.
Not weldable, general processing performance.
Because of poor corrosion resistance, aluminum-zinc splints are often used as protection, which results in reduced fatigue strength.
Applications where high strength but low weight ratio is required, and good fatigue strength.
Not weldable, general processing performance.
Because of poor corrosion resistance, aluminum-zinc splints are often used as protection, which results in reduced fatigue strength.
5052 represents the brand of the product, and the word "5" indicates that the modified product belongs to the aluminum-magnesium alloy product.
According to the chemical composition, it can be seen that the magnesium alloy content of the product is between 2.2-2.8%, and the density is 2.68.
Generally, enterprises take the median value of 2.5% magnesium alloy content in the processing process, so this series of aluminum plate can become AlMG2.5.
According to the chemical composition, it can be seen that the magnesium alloy content of the product is between 2.2-2.8%, and the density is 2.68.
Generally, enterprises take the median value of 2.5% magnesium alloy content in the processing process, so this series of aluminum plate can become AlMG2.5.
Aluminum foil surface is clean, sanitary, no bacteria or micro-organisms can not grow on its surface.
aluminum foil is a non-toxic packaging material, it can directly contact with food without any harm to human health.
aluminum foil is a kind of tasteless odorless packaging material, will not make the packaging of food have any peculiar smell.
aluminum foil itself is not volatile, it itself and packaged food will never dry or shrink.
aluminum foil is a non-toxic packaging material, it can directly contact with food without any harm to human health.
aluminum foil is a kind of tasteless odorless packaging material, will not make the packaging of food have any peculiar smell.
aluminum foil itself is not volatile, it itself and packaged food will never dry or shrink.
ENQUIRE NOW
If you are interested in our products and services, please contact us or leave us a message, we will serve you wholeheartedly
Copyright ©
